Online, Double Conversion with highly reliable inbuilt galvanic isolation transformer,pure sine wave output power.
These UPS are very useful where you require optimum level of performance and safety of products, its galvanic isolation design has all this protection level.
High backup time can be achieved because these ups are capable to charge the big SMF batteries.
Input |
|
Nominal Voltage | 230V |
Input Frequency Range | 50Hz +5 Hz |
Input Connections | 3 Wire ( 1Phase+ N+G ) |
Input voltage range for | 180 – 270V |
Main operations | |
Output |
|
Output Voltage Configrations | 220/230/240 +/- 1% |
Output Frequency | 50Hz +/- 0.5 Hz |
Output Connections | 3 Wire ( 1Phase+N+G ) |
Waveform Type | Pure Sine Wave |
Crest Factor | 3:1 |
Harmonic Distortion | Total harmonic distortion less than 2% on |
Linear load and less than 5% for non linear load. | |
Over Load Capacity | 130% for 5 Min |
150% for 5 Sec | |
Output Power Factor | 0.7 lag to unity |
Protections |
|
Input/Output over-voltage Output overload Output short circuit Battery overcharge Battery deep discharge Spike suppression |
|
Indications |
|
Mains on, Inverter On, Load on mains, Load on battery ,Overload, Low battery | |
Alarms |
|
Over Load alarm, Low battery alarm, system trip alarm. | |
Battery |
|
Battery Type | SMF Prefered |
Battery Voltage | 72/144V up to 3Kva and 180/192V for above rating. |
Environment |
|
Operating ambient temperature | 0-45 deegree centigrade |
Storage temperature | 0-70 deegree centigrade |
Humidity | 90% Non Condensing. |
Optional |
|
Static ypass switch Manual By pass Remote on/off panel Remote Indication panel Hot Standby Mode / Parallal Redundant Mode |