Double Conversion with highly reliable inbuilt galvanic isolation transformer,pure sine wave power for large offices,Malls,Commertial Complexes,,Industrial applications,ACs,Reffrigrators,Deep frigers,Farm Houses,Khothies Etc.
Input |
|
Nominal Voltage | 230V |
Input Frequency Range | 50Hz +5 Hz |
Input Connections | 5 Wire ( 3PH+ N+G ) |
Input voltage range for | 350 – 480V |
Main operations | |
Output |
|
Output Voltage Configrations | 230/400 + 1% |
Output Frequency | 50Hz + 0.5 Hz |
Output Connections | 3/5 Wire ( 3PH+ N+G ) |
Waveform Type | Pure Sine Wave |
Crest Factor | 3: 1 |
Harmonic Distortion | Total harmonic distortion less than 2% on |
Linear load and less than 5% for non linear | |
Over Load Rating | 100% continuously |
130% for 5 Min | |
150% for 60 Sec | |
Output Power Factor | 0.8 lag to unity |
Protections |
|
Input/Output over-voltage | |
Output overload | |
Output short circuit | |
Battery overcharge | |
Battery deep discharge | |
Spike suppression | |
Indications |
|
Mains on,Inverter On,Load on mains, Load on battery ,Overload,Low battery | |
Alarms |
|
Over Load alarm,Low battery alarm,system trip alarm | |
Battery |
|
Battery Type | SMF Prefered |
Battery Voltage | 180/360V |
Environment |
|
Operating ambient temperature | 0-45 deegree centigrade |
Storage temperature | 0-70 deegree centigrade |
Humidity | 90% Non Condensing |
Physical |
|
Height | |
Width | |
Depth | |
Weight | |
Optional |
|
Static Bypass switch/Manual By pass | |
Remote on/off panel | |
Remote Indication panel |
Complete isolation of output from input
Enble to start load without mains
Hence more reliable protection
All type of single phase and three phase loads
Charging compatability on generator